TikkyClean

Commissioning

Commissioning cleaning for technology and critical environments

Specialist pre-handover cleaning that removes construction residue and prepares technical spaces for commissioning tests and handover.

CommissioningBudeNorth Cornwall
Technician preparing a data centre for commissioning

Service overview

Commissioning cleaning prepares technical spaces for testing and handover

This opening section explains the service before the page moves into proof, fit and next steps.

Commissioning cleaning is the specialist cleaning carried out before a new or refurbished technology facility is tested, commissioned and handed over. It removes construction residue so sensitive equipment and environmental systems are not affected by dust, fibres or residues.

Work is sequenced after the main building trades and before final commissioning tests. It covers data halls, server rooms, communications rooms, plant rooms, UPS rooms, switch rooms, raised floors and white space.

Typical areas

Technical areas we commonly prepare

A short list of the spaces commissioning cleaning typically covers.

  • Data halls & server rooms
  • Raised floor voids
  • Plant rooms & AHUs
  • UPS & switch rooms

What's included

What's usually included

The exact scope is shaped to the property and your priorities. The list below describes the typical tasks covered in a standard visit — site-specific items are agreed during booking.

Areas covered

  • Main living and communal areas
  • Kitchens and staff areas
  • Washrooms and toilets
  • Floors and entrances

Typical tasks

  • Vacuuming and mopping
  • Surface dusting and wiping
  • Sanitisation of touch points
  • Bin emptying and tidy-up

Our process

Sequenced cleaning aligned with commissioning programmes

We coordinate with principal contractors and commissioning managers to define scope, phasing and acceptance criteria.

Step 01

Survey & method statement

Site survey, risk assessment, method statement and RAMS prepared for each area.

Step 02

Controlled cleaning

HEPA vacuums, low-lint cloths and controlled methods to remove fine dust and residues.

Step 03

Evidence & handover pack

Photographic evidence, checklists and documentation support practical completion and client handover.

HEPA filtrationEvidence-led handoverContamination controlCommissioning support

Frequently asked questions

When should commissioning cleaning take place?

+
Usually after main trades finish but before commissioning tests; phasing is agreed during the survey.

Do you provide RAMS and photographic evidence?

+
Yes — method statements, RAMS, COSHH notes and photographic before/after evidence are included where required.

How do you work around commissioning schedules?

+
We coordinate with commissioning managers to agree windows, acceptance criteria and evidence formats so cleaning does not delay testing.

Can you clean raised-floor voids as part of commissioning?

+
Yes — raised-floor void cleaning is included where specified and is carried out with tile-by-tile control to protect cabling.

What handover evidence do you supply?

+
A handover pack typically contains photographic evidence, labelled checklists and any agreed swab or particle notes to support practical completion.

Gallery

Commissioning imagery

Artwork from the relevant service folder is shown here so each route has its own visual set.

Commissioning Cleaning gallery 1
Primary image
Commissioning Cleaning gallery 2
Gallery 2
Commissioning Cleaning gallery 3
Gallery 3

Why choose TikkyClean

A premium local service that stays practical

Specialist methods for technical spaces
Evidence-led handover packs
Coordination with commissioning programmes

Google Reviews

What local clients say

The right review proof sits after the service has been explained and before the final CTA.

Google Reviews9 reviews

5.0

average rating

5.0 average from 9 Google reviews

Local feedback that reflects the kind of service this page is describing.

View all reviews

A simple next step

If this sounds right, send the details through

The contact form is the main CTA across the whole site.

Use the contact form to ask for a quote, request a callback or outline the property and timings you need help with.

Request a Quote